transition layer
英 [trænˈzɪʃn ˈleɪə(r)]
美 [trænˈzɪʃn ler]
网络 过渡夹层; 过渡层; 转换层
双语例句
- The prepared PBA/ PMMA had perfect core-shell structure and there was a transition layer between the core and shell layers.
PBA/PMMA乳液具有完善的核壳结构，且在核壳两相间存在着一个过渡层。 - The results indicated that the microstructure of the transition layer is a structure of fine columnar crystal-cystiform dentrite-dentrite.
结果表明，梯度过渡层的组织形态为细小的柱状晶-胞状树枝晶-树枝状晶。 - Followed by the high temperature burning layer, transition layer, the organic insulation layer, a strong heat-resistant layer and layer.
依次由耐高温灼烧层，过渡层，有机隔热层，强力层及耐热层组成。 - Adopting the nickel aluminum alloy as the transition layer has simplified the production process of the combination transition layer and improved the combination intensity of the body.
采用镍铝合金作为过渡层，简化了结合过渡层工艺，提高了与本体的结合强度。 - The mechanism of granular transition layer crack preventing and construction application
级配碎石过渡层防裂机理及工程应用 - The transition layer has many gas holes and loosing structure.
过渡层含有大量的气孔，结构疏松； - Construction technique of girder-type transition layer in Shenzhen Elysees Garden Phase III Project
深圳榭丽花园三期梁式转换层施工技术 - Preparation of Ni-P Alloy Transition Layer of High-Precision Optical Surface for Reflection Mirror with Large Size
大尺寸反射镜高精度光学镜面Ni-P过渡层的制备方法 - Effects of Undercooling Degree on the Morphology, Composition and Transition Layer of the Diopside Crystal
熔体过冷度对透辉石晶体形貌、成分及过渡层性质的影响 - Using Intermediate Transition Layer to Bond Al Alloy and Stainless Steel by Diffusion Welding with Two-step Temperature
采用中间过渡层双温扩散焊连接铝合金和不锈钢 - When the transition layer is Copper T2 and Nickel N6 respectively, two kinds of working temperature above the eutectic temperature and below the eutectic temperature were chosen.
以紫铜他、镍N6做过渡层时，选择了共晶温度以上和共晶温度以下两类加工温度； - Seismic Analysis and Comparative Research on High-Rise Structures with Steel Truss Transition Layer
带钢桁架转换层结构的地震反应分析与比较研究 - Influence of Structure Transition Layer on Statical and Dynamical Properties of Ferroelectric Thin Films
铁电薄膜的静态特性及动态介电特性的结构过渡层效应 - The surface transition layer makes the film surface smoothness greatly improve and the dynamic friction coefficient decrease.
镀有过渡膜的样品具有最为平整的表面形貌和最小的表面动摩擦系数。 - Because the thickness of the transition layer has already induced interference, the interference can be changed even if the newly deposited layer is very thin.
由于过渡层的厚度已经引起干涉，新镀上去的待测薄膜即使很薄，也会引起干涉的变化。 - The microstructure between alloy transition layer and base metal has been studied.
研究分析了合金过渡层与金属基体接合界面组织结构。 - The thickness of both effective hardened layer and transition layer, and the surface hardness and microstructures were studied.
并对有效硬化层深、过渡区层深、表面硬度变化以及金相组织进行了研究。 - The theoretical basis of geosynthetic materials in replacement of transition layer of broken stones is expounded.
阐述了土工合成材料替代碎石过渡层作用的理论依据。 - The grain size of every layer dam materials must meet the demands of transition layer;
各层坝料之间其粒径必须满足层间过渡要求，这是坝体渗流控制的基本原则； - The thickness of transition layer of crystal polymer is generally calculated by one dimensional electron density correlation function.
一般用一维电子密度相关函数来计算结晶聚合物的过渡层厚度。 - The structure of adhesive phase and transition layer in bright layers are mixed type of martensite.
白亮层中的粘结相以及过渡层的组织均为混合的马氏体组织。 - The deformation layer can be divided into three parts: nanocrystalline layer, sub-microcrystalline layer and transition layer.
高锰钢喷丸处理后变形层可大致分为纳米晶层，亚微晶层和过渡层。 - Joints with transition layer bond and mechanical connection between fluoroethylenepropylene ( FEP) and metal, are studied.
研究了热塑性氟塑料聚全氟乙丙烯（FEP）和金属的连接方法，包括过渡层粘接和机械连接两种。 - The interfacial bonding between Graphene, CNTs and BCP was well, without obvious transition layer.
Graphene、CNTs与BCP具体的界面结合良好，没有明显过渡层。 - In most cases, transition layer and the cladding layer after cooling performance of macro-tensile stress.
在大多数情况下，冷却后过渡层和熔覆层宏观上表现为拉应力。 - The interface between the coating and substrate was smooth and clear without transition layer.
渗层与基体之间的界面清晰平整，无过渡层。 - Compared to double-layer coatings, the utility of transition layer recessive relaxed the stress mutation.
与双层涂层相比，梯度涂层中过渡层的应用缓和了涂层中的应力突变。 - There is no obvious crystal boundary between core and shell, only connected by a transition layer.
ZnO壳与CdS核之间并没有形成明显的晶界，仅通过一层过渡层相连。 - The greater the internal stress of transition layer, the impact of the laser cladding layer is also greater.
过渡层的内应力越大，对激光熔覆层的影响也越大。 - A transition layer formed when two catalyst layers was hot-pressed that main reaction occurs.
内外两催化层的交接处在热压过程中形成一个过渡层，反应集中在过渡层内发生。